1. With Head-lifting system
2. Fed-batch culture support pH Stat, DO Stat
3. Color LCD Integrated Microprocessor Controller
4. Validation support documentation available(IQ,OQ)
5. Fermentor system represents ideal intermediate step
6. Automatic control and data saving of DO, pH,temperature agitation and nutrient feed
7. Processing parameter is controlled by microprocessor
8. Automate or Manual sterilization in place by external steam supply or optional steam generator.
9. The modular design consists of the supply unit the culture vessel and the control cabinet.
10. The open frame design of the supply unit provides ready access and ease of maintenance
11. Sterilization procedures are programmable
12. Accessories for cell culture applications are available
DC motor, AC Gear motor, Top drive(mechanical drive)
|Turbine impeller(SUS316L) Foam breaker (SUS316L)|
|Magnetic Hall sensor|
|Microprocessor based PID|
Using 316L stainless steel it is polished mechanically and/or electrically
|316L stainless steel prevent contamination and is polished by electrically|
|Viton or silicon material is used for the O-ring and the EPDM is used for gasket|
|The head lift system is powered by air cylinder and guided by two sets of linear motion fuide. The lifting load capacity can be adjusted and designed for the size of the head plate|
From 3oC above the cooling water temperature to 80oC (accuracy ±0.1 ℃)
|The temperature is automatically controlled by the external heat exchanger system|
Ring sparger (SUS 316L)
|The cartridge type sterilizable pleated type 0.2um absolute filter is applied|
|The same as intel filter specification(option item)|
|Different vessel size and/or ordered specifications|
|The pressure is controlled manually and/or automatically|
8.5＂Graphic Color LCD, Membrane keypad
|Memory stick, printer, computer with the RS-232C communications protocol|
|Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system|
|220V 50/60Hz, Single phase, 380V 50/60Hz three phase|
|pH, DO, Pressure, Temperature and Agitation speed|
• Stainless steel (SUS 316L) is used to prevent contamination and rusting.
• Water jacket system is adopted for precise temperature control.
• Sight glass makes to monitor the status of the media.
• Redundant ports are installed on the head plate that the auxiliary sensor can be installed.
• Sensor ports are made in the circumferential direction on the lower side of the vessel.
Sentinain Technology has over 20 years experience in providing insulin fermentation for insulin production for you. As one of the leading manufacturers and suppliers in China, we are equipped with advanced equipment and technology. Please be free to get the low price equipment from our factory and check the quotation with us.