Bioreactor Plant Cell Culture

Range

50~1000 rpm 1 rpm

Impellers

Turbine impeller(SUS316L) Foam breaker (SUS316L)

Sensor

Magnetic Hall sensor

Control

Microprocessor based PID Control

Materials & Finish

Vessel

Using 316L stainless steel it is polished mechanically and electrically

Piping

316L stainless steel prevent contamination and is polished

O-rings/Gaskets

Silicon material is used for the O-ring and the EPDM is used for gasket

Sterilization

Built-in heater makers the in-situ sterilizing for the vessel, head plate, filter, aeration pipe lines and etc. in 105 ~130 temperature range automatically

Temperature

Range( )

From 3°C above the cooling water temperature to 80°C(accuracy 0.1°C)

Sensor

RTD (Pt-100)

Control

The built-in heater cartridge raises and cooling water pulling downs the water temperature and water pump circulates the water inside of the jacket

Aeration

Sparger

Ring sparger (SUS 316L)

Intel Filter

The cartridge type sterilizable pleated type 0.2μm absolute filter specifications(option item)

Out Filter

The same as internal filter specification(option item)

Control Range

Different vessel size and/or ordered specifications

Pressure Control

The back pressure is controlled manually and/or automatically

Control Unit

Panel

8.5" Graphic Color LCD, Membrane keypad

Communications

Memory stick, printer, computer with the RS-232C communications protocol.

Controller Board

Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system

Power Supply

220V 50/60Hz, Single phase

Data Storage

pH, DO, Pressure, Temperature and Agitation speed

D

H

P

PD100

100L (70L)

385

900

155

40

2.3 :1

PD200

200L (150L)

500

1055

200

40

2.1 :1

PD300

300L (210L)

550

1255

220

40

2.3 :1

PD500

500L (350L)

680

1400

280

40

2 :1

PD700

700L (500L)

750

1600

300

40

2 :1